Plesk 5

a. Fetch your certificate 1.You will receive an email when your certificate is issued. 2.Go to your Status page: https://www.thawte.com/cgi/server/status.exe 3.Enter your Order number and password 4.Select the 'Standard certificate' format option to download your issued certificate. 5.Copy and Paste your thawte certificate to a text editor (Notepad) and save the file with a .txt extension. b. Installing your SSL Web Server Certificate: 1. Copy and paste your certificate from your Status page into Notepad. 2. From inside PSA, choose the domain in which you are installing the SSL certificate. 3. Access the domain's SSL section by clicking on the 'certificate' button. (If the 'certificate' button is grayed-out, this means the domain is set up for name-based hosting. If you want a domain to utilize all of the SSL capabilities available, that domain must be configured for IP-based hosting.) 4. When a CSR (certificate signing request) is generated there are two different text sections, the RSA Private Key and the Certificate Request. When installing a certificate, the RSA Private Key text needs to be pasted into the block preceding the web server certificate. Example: -----BEGIN RSA PRIVATE KEY----- [[ECRYPTED BLOCK OF TEXT]] -----END RSA PRIVATE KEY----- -----BEGIN CERTIFICATE----- [[ECRYPTED BLOCK OF TEXT]] -----END CERTIFICATE----- 5. Paste the Private Key with the Certificate text into the 'Enter Certificate Text:' text box and press the 'Send Text' button. There should be a prompt that reads "Certificate Successfully Installed". 6. Test your certificate by using a browser to connect to your server. Use the https protocol directive (e.g. https://your server/) to indicate you wish to use secure HTTP. Note: The padlock icon on your browser will be displayed in the locked position if your certificates are installed correctly and the server is properly configured for SSL.