Welcome to Global Trust 256 bit SSL Security Site.

  現在位置 : 技術資源 > 知識庫FAQ > SSL 憑證 > Globaltrust > 安裝憑證 > Certificate Installation: Microsoft IIS 4.x

技術 / 資訊搜尋 

Certificate Installation: Microsoft IIS 4.x

Installing your IIS SSL Certificate on Microsoft IIS 4.x
Step 1. Install the Server file certificate using Key Manager
Go to Key Manager.

Install the new IIS SSL Server certificate by clicking on the key in the www directory (usually a broken key icon with a line through it), and select "Install Key Certificate".

Enter the Password.

When you are prompted for bindings, add the IP and Port Number. "Any assigned" is acceptable if you do not have any other IIS SSL certificates installed on the web server.
Note: Multiple certificates installed on the same web server will require a separate IP Address for each because SSL does not support host headers.

Go to the Computers menu and select the option "Commit Changes", or close Key Manager and select "Yes" when prompted to commit changes.

The new IIS SSL Server certificate is now successfully installed.

Back up the Key in Key Manager by clicking on Key menu> Export -> Backup File. Store the backup file on the hard drive AND off the server.

Step 2: Installing the Root & Intermediate Certificates:

Your IIS SSL Certificate will have been emailed to you. The email will also contain two other Certificates: the ROOT certificate and Intermediate CA certificate .Save these Certificates to the desktop of the web server machine.

It is essential that you have installed these two Certificates on the machine running IIS 4. You may also download them from the support section of the website:

Once you have installed the Certificates, restart the machine running IIS 4. You must now complete one of the following procedures - the procedure you follow is dependent on the Service Pack that has been implemented on your machine running IIS4.

Service Pack 3:
Install the above certificates in your Internet Explorer by opening each certificate and clicking "Install Certificate". You may then use this IIS CA batch file to transfer all root certificates from your Internet Explorer to the IIS (see Microsoft Knowledge Base Q216339).

Service Pack 4:
Install the above certificates manually in a specific root store (you may also want to read (see Microsoft Knowledge Base Q194788):

Install the Root certificate by double clicking on the corresponding file this will start an installation wizard

select Place all certificates in the following store and click browse

select Show physical stores

select Trusted Root Certification Authorities

select Local Computer, click OK

back in the wizard, click Next, click Finish

Repeat the same for the Intermediate CA Certificate however choose to place the certificates in the Intermediate Certification Authorities store.

Service Pack 5:
Same as SP4.

Service Pack 6:
Same as SP5.

Reboot the web server to complete the installation.

技術支援系統登入 忘記密碼?


文件區 (3)
SSL 憑證 (0)
CodeSign程式碼簽章 (0)
Email憑證 (24)
隱私條款 法律聲明 安全說明連絡寰宇